Honda D Series Forum banner
1 - 3 of 3 Posts

·
Banned
Joined
·
3 Posts
Discussion Starter · #1 ·
Hello everyone,,
Ok looks like I may have made a mistake in ordering my cam.
My setup
D15 Block Y8 head.
Somebody on here told me what applies to the D15 applies to my engine which may not turn out to be true.

So the cam I got was a
SOHC VTEC CAMSHAFT 92-95 CIVIC SI D16Z6

Now Im thinking the cam I should have got was
SOHC VTEC CAMSHAFT 96-00 CIVIC SI D16Y8

So this little panic attack is over how hard is it going to be to get the Z6 cam shaft into a Y8 head.
And what if any are the differences between the Z6 head and the Y8.
Im hoping both the cams are interchangeable..
 
1 - 3 of 3 Posts
Top