Honda D Series Forum banner
1 - 7 of 7 Posts

·
Registered
Joined
·
277 Posts
Discussion Starter · #1 ·
I just installed new injectors. S300 for management. Car starts right up with stock injectors. Installed new deatchwerks 1000's object is and now it won't start. Getting spark and fuel. Updated in s300 with specs to go with it. Anyone had this issue?
 

·
Registered
1987 CRXSi
Joined
·
416 Posts
Same kind of injector (peak vs. saturated)? Did you adjust the fuel tables for an injector that is ~5X larger?
 

·
Tape-R taper/driver
EC3, ED8, ED9, EE5
Joined
·
574 Posts
I work for DW, so I'm here to help.

Part number is 22S-01-1000-4?

Post up a screen shot of all your injector tables/inputs.


I check DSO once every few days, so, if you want a more prompt way to communicate with me, send me an email: [email protected]
 
  • Like
Reactions: slo_eg8

·
Retired From Hondas
Joined
·
2,796 Posts
I work for DW, so I'm here to help.

Part number is 22S-01-1000-4?

Post up a screen shot of all your injector tables/inputs.


I check DSO once every few days, so, if you want a more prompt way to communicate with me, send me an email: [email protected]
Expect an email from me as well :TU:
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top