Honda D Series Forum banner

Harness/pinn swap

953 Views 7 Replies 3 Participants Last post by  X292J
Can anyone help me??

Ive planning to swap a d16z2 in mei eg4 (d15z1)

I have the complete d16 wirings and the ecu (both came from my deer killing EF:hammer: )


buit i dont know which pins i must change to make them run

i hope you know what i mean

ive got three connectors

which one have i to change??

(sorry for the terrible speech)
1 - 8 of 8 Posts
nobody can help me???
Welche drei connectors meinen Sie? Wissen Sie, was sie auf englisch benannt werden?

Können Sie eine Fotographie nehmen?
i mean this three connectors

Attachments

See less See more
help help:slap:
They look like connectors from a DPFI harness. I dont know much involving a DPFI to MPFI swap but assuming If the D16z2 is an MPFI engine i would look into a MPFI swap DIY such as this one. I know theres a bunch of crazy wiring stuff ussualy involved with it so something usefull might be in there that you could relate to with the wiring you have.
http://hondacrx881.tripod.com/mpfiswap.html
another
http://www.angelfire.com/d20/hcivic88/4gtech.html
something else i found.
http://www.psytronix.org/xo/modules/wfsection/article.php?articleid=5

Not much but it might get you started, maby someone with more expertise might chime in. GL :TU:
THANKS for the input

so

d15b2 is an obd0
d16z2 is an obd1


if i buy an adaptor(right word?????) i can swap my engine plug and play??

did i say i hate those electronic fuck??

ohyeahhhh I hate it so much!:shoot: :rl:
See less See more
THANKS for the input

so

d15b2 is an obd0
d16z2 is an obd1

I wish i could help you more, but I really dont know on board diagnostic numbers for the the D16Z2 and d15z1. Let alone what really gose on with a MPFI swap on a DPFI car. Maby if i saw the manifold pics n stuff ect... Although what i do know is the D15B2 here in the states is OBD0 (DPFI)

if i buy an adaptor(right word?????) i can swap my engine plug and play??
I think so or something of rewireing something, i know a few companys out there provided things like that. Such as re-wire ect.

Maby if you tried SOHChonda.com someone overthere might help, i know for a fact that one of the frequent poster there is from England. Since thats closer to Germany maby he might know something.

Best of luck mang :TU:
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top