Honda D Series Forum banner
1 - 13 of 13 Posts

·
Registered
Joined
·
158 Posts
Discussion Starter · #1 ·
I got some 92-96 H22 injectors from EBAY and I was wondering how would I know if this are really H22 injectors. This are OBD1 and they are peak and hold cause I tested them. but how can I tell if this are really H22 injectors because h23 injectors are obd1 peak and hold too but they are 240cc

The injectors that I have have an orange tip?
if anyone knows please let me know
 

·
Banned
Joined
·
3,566 Posts
Even if they are h22's, they will only spray what the ecu tells them to spray. Have to have the ecu chipped to spit more fuel in the motor.
 

·
Registered
Joined
·
158 Posts
Discussion Starter · #11 ·
Y7 190cc, all other motors including type R 240cc and H22 is the only 310cc
According to the sticky at the top of the page about injector flow rates the
92-96 h22 peak and hold injectors are 345cc and the h23 are 240cc. 97-up
h22s are saturated 290cc.
I got mine off ebay and it said H22 345cc injectors and there were a couple of more sets for sale and those said h22 345cc injectors too

How do I know if I have the h23 or the h22 injectors?
 
1 - 13 of 13 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top