Honda D Series Forum banner
1 - 14 of 14 Posts

·
Registered
Joined
·
285 Posts
Discussion Starter · #1 · (Edited)
FS: some charge pipes. Need modifying for intercooler - SOLD



the pipes came from my 15G kit, and fit with no intercooler. If you have one, then modifications are needed.

the two small pieces are 2", and the top one is 2.25"

asking: 50 bux + shipping (that may be 30 bux due to the size)

paypal: [email protected]

PM me your shipping address as well. I'll see it on paypal, but just in case.


----------- SOLD -------------
 

·
Registered
Joined
·
285 Posts
Discussion Starter · #4 ·
^ if you're asking whether or not that's the complete 15G pipe kit, then yes, that's it.
 

·
Registered
Joined
·
285 Posts
Discussion Starter · #8 ·
I'll do it for 75 shipped
 

·
Registered
Joined
·
285 Posts
Discussion Starter · #11 ·
PMed.

the pipes go like this: Turbo outlet facing down -> pipe 1 goes behind the bottom of the radiator -> pipe 2 goes up through the fender -> pipe 3 connects to the intake manifold.

there's a guy on here that has his avtar made with the picture of the GReddy 15G kit installed on a taken out motor. Can't tell his name though, but if you find him, that's gonna help you visualise the whole story.

you're gonna need two more couplers for the big pipe
 

·
Registered
Joined
·
285 Posts
Discussion Starter · #13 ·
---------- Sold --------------
 
1 - 14 of 14 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top