Honda D Series Forum banner

1 - 8 of 8 Posts

·
No Tune No Life!
99 Supercharge Regal
Joined
·
2,045 Posts
Discussion Starter #1
Here ya go i have got a lot of questions about the specs on my delta can i got the delta 282 grind it was $117.00 thats with shipping both ways and i also got a delta cams shirt.

so here my spec sheet!

282 grind:
205 duration
260 cam rise
390 lift

so for thos who were wonder there ya go!!

RC
 

·
Brokedick Millionaire
Joined
·
40,630 Posts
info is worthless.......

205 duration at what lift????
260 cam lift, is that the lobe difference
390 lift, likely at the valve.....seems they used Chevy 1.5 rocker ratio.
 

·
No Tune No Life!
99 Supercharge Regal
Joined
·
2,045 Posts
Discussion Starter #5
info is worthless.......

205 duration at what lift????
260 cam lift, is that the lobe difference
390 lift, likely at the valve.....seems they used Chevy 1.5 rocker ratio.
im sry i ment

260 cam rise if u dont know what that means its ok
and 205 duration at 390 lift ur welcome sry to afend u its for those who wanted to know not for those that dont care. thank

RC
 

·
Registered
88 ED6
Joined
·
5,511 Posts
260 cam rise= 260 degrees of lift or overall duration? 205 degrees of .390 lift???

The way you stated it didn't really make much sense at all.
 

·
Registered
96dx saloon
Joined
·
990 Posts
i am confused too. i think you know what you are saying, just not saying it right. when i called them, they said the specs for each cam were a little bit different depending on what core you sent them.

ryan
 

·
No Tune No Life!
99 Supercharge Regal
Joined
·
2,045 Posts
Discussion Starter #8
260 cam rise= 260 degrees of lift or overall duration? 205 degrees of .390 lift???

The way you stated it didn't really make much sense at all.
thanks for the corection i just thought i would try and do some people a favor and post up what the told me over the phone. sry for the confusion!
 
1 - 8 of 8 Posts
Top