Honda D Series Forum banner

1 - 20 of 42 Posts

·
formerly Kit88
Joined
·
6,233 Posts
Discussion Starter #1
I went to the track today:

best 1/8 mile time:
reaction: 0.689
60 ft 2.263
et 9.947 at 71.54

running 1 bar on my apexi kit, a lot of spinning at 6500 rpm´s
20x8x3 hoosier slicks.
launching at 5000 spinning.

I´ll put my traction bars and obx lsd tranny in 2 weeks and get a better tunning because my car is running a lilltle rich,


Opinions.....
 

·
formerly Kit88
Joined
·
6,233 Posts
Discussion Starter #3
dude... something has to be wrong.. i run that with a cammed street tire car....
how much boost are you running?
about 14psi, car spinns a lot
 

·
formerly Kit88
Joined
·
6,233 Posts
Discussion Starter #5

·
formerly Kit88
Joined
·
6,233 Posts
Discussion Starter #7
seems a bit slow...

your 60' is pretty decent, maybe turn the boost down a little so you dont spin so much
Any idea of what should be my 1/8 and 1/4 mile with my setup???
 

·
R2.....Zap Balls
Joined
·
5,186 Posts
running 1 bar on my apexi kit, a lot of spinning at 6500 rpm´s
about 14psi, car spinns a lot
1 bar should be around 16 psi. That time seems a little low to me too. Mine did 9.8 @ 8.5psi on street tires spinning 1st and 2nd on a soft launch.
 

·
formerly Kit88
Joined
·
6,233 Posts
Discussion Starter #11
Note my car is a heavy Sol
 

·
R2.....Zap Balls
Joined
·
5,186 Posts

·
formerly Kit88
Joined
·
6,233 Posts
Discussion Starter #17
running slicks at 10 psi.,

Let me tell you guys how it happend:

I launch at 4500-5000 spinning and then grab about 5500, but when car reaches about 6500 rpm´s go really fast to 7500 I think that spinning same in second and third.

wtf??????????
 

·
Premium Member
Joined
·
5,910 Posts
I'm gonna say slipping clutch. For slicks that 60 is horrible. You also said you are getting alot of spinning. Or so it seems :) I bet you arent spinning at all but rather hearing the engine rev due to a crap clutch.
 
1 - 20 of 42 Posts
Top