Ya i know the drop is coming I'm throwing a 5 spd in and im in the process of building a y8 block it at the machine shop now so as soon as i take it off the road the shocks, springs, poly bushings and swaybars are going in too.
This is from a customers turn key build. I apologize for the lack of pictures, I lost of 3/4 of the pictures taken during this project due to a theft.
D16A1 block and head
75.5 x 90
custom CP Pistons
Cometic .028" headgasket
Canton 5.5qt oil pan
Just wanted to share some pics of my EF.
Got it started for the first time in a few years last weekend, pulled it out and gave it a wash... Now i'm pumped to get it tuned and back on the road.
Not really sure what power to expect yet, but my goal is to crack into the 13's on the...
I thought it was about time I started posting where I'm at with this.
The CRX is mostly stripped down.
Most of the dash still to be removed, then doors and hatch.
Engine out with head off. Needs to go on stand and be stripped down. I need to make room in workshop.
D17 need to be stripped of...
Picked up a 91 ef hatch in trade, came with a high milage d15b2 that burnt oil and ran rough.
Upon inspection, found that cylinder 3 had low compression. Alternator was dead, distributer nearly fried, tps sensor and map sensors both bad, fouled plugs and incorrect plug wires.
Came with alot of...
It's been a while since I have been active on DSO, mainly because I moved to Hawaii as the worship pastor of a church. However that doesn't mean that I have given up on the world of Honda's, building heads, etc. I mean, I built a 91 wagon and shipped it to O'ahu so that I could enjoy my ride...