Honda D Series Forum banner
1 - 1 of 1 Posts

93 Civic HB SI, 95 Civic HB CX
2,417 Posts
I see what he's talking about now.

The arrows in his picture point to the dark side so its hard to see, but see the gap between the sprocket and snout as the sprocket inner diameter radius begins to move away from the snout? Here:

Automotive tire Motor vehicle Tire Bicycle part Automotive lighting

You have a small snout (0.845") crankshaft installed, and need the large snout (0.944") to have your accessory pulley and bolt work.

See this thread:

OP, if a machine shop did this work for you, tell them they need to source a D16 crank with the large snout.
1 - 1 of 1 Posts