[Green 91]

i didnt tilt my rad, i only modded my stock crossmember

 

[Green 91]

i didnt lean mine back at all, i just modded the stock crossmember

 

[Green 91]

i cut the sheet metle of the lower crossmember a little so it sits about stock hight on top, i even tilted it to the right for added security not to hit the hood.
im useing the del sol dual core

 

[Green 91]

yeah i simply cut teh excess metel from the stock crossmember, i even cut the under side of the hood and tilted the rad, just to be 100% sure it woudl clear, probaly didnt need to tilt the rad, mine is zip tied in for now, using my stock fan.
and i also cut the top mounting nipple off.

it cools just fine, no leaks or anything

 

[Green 91]

I just did my install as well.

I endend up notching my stock crossmember and then rewelding it. This lets the rad sit a little lower, but I still had to notch the webbing in the hood too. fits nice now with no 'gangsta lean'.

pretty much what i did

 

[Green 91]

looks like a del sol Vtec dual core