Honda D Series Forum banner

ECU screwed?

700 views 5 replies 5 participants last post by  5speed4life 
#1 ·
Ok I did the nokia data logging cable thing and that did not work so I bought the moates HULOG so that I knew it would work. I put it in today and I cut the J12 resistor. but when I went to put it back into the car I noticed that the chip end of the moates Ostrich had some pins broken on it. I put it in a and it looked like what was left of the pins contacted the socket, but now my car started and idled really bad then won't not start after that. Now I am wondering if it was because I cut the J12 resistor or are the broken pins not making contact?
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top