Honda D Series Forum banner
1 - 8 of 8 Posts

·
Registered
Joined
·
122 Posts
Discussion Starter · #3 ·
my ecu is p2e and she no acept racing chips, but other ecu acept racing chip

what ecu you think that I must use?? I CHANGE OBD2A TO OBD1 OR OBD0 THIS NOT A PROBLEM.....:)
 

·
Registered
'95 Civic dx
Joined
·
835 Posts
Get a conversion harness to ODB1 and use a P06 ecu thats chipped. I actually have one forsale.
x2, there is no chipping the stock 96-00 ecus... if there is boost there has to be an fmu, hondata, stand alone, or chipped obd1 ecu... and the chipped ecu has the most tunability for the cheapest price.
 

·
Registered
'95 Civic dx
Joined
·
835 Posts
how I can make to buy that chip and HOW MUCH?

I HAVE PAYPAL
if you cant find one from someone on this site (and you wont be able to use the classifieds until u have 65 posts) you could probably find a used ecu on ebay (p28 for vtec and p06 for non) and buy a chipping kit and a conversion harness from xenocron.com. you will need to buy a chip burner to burn your chips as well and these can be found on ebay by searching "willem programmer"... good luck and dont overpay for anything

hit me up with a pm if u have any questions about buying anything
 
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top