Honda D Series Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
264 Posts
Discussion Starter #1
How would i go about getting a p06 ecu to be changed to a p28 or a p08 ecu? Is all i have to do is get a chip thats for a p08 or p28 ecu??
 

·
Registered
Joined
·
1,253 Posts
U could try an attempt to do it yourself. There's ppl on this site that can convert it to vtec for u.
 

·
Registered
Joined
·
264 Posts
Discussion Starter #3
well i am able to do it myself cause i am extremely good with electronics an have chipped ecus before so i was just wondering what i nee or if someone can point me in the direction of how to doing it or tell me somone who can that would be great
 

·
Registered
Joined
·
2,159 Posts
lots of write-ups. <Search button should be here> Chip it via the instructions, and choose your base rom to download and upload to the EEPROM. (search to download the roms too)

I personally like the P08 code.

Very easy... it just takes some de-soldering the socket holes.... and soldering in the socket 2 resistors, 2 caps, and a jumper.
 
1 - 5 of 5 Posts
Top