Honda D Series Forum banner

1 - 7 of 7 Posts

·
Registered
90 civic si
Joined
·
1,536 Posts
Discussion Starter #1
I have been searching the net for the answer but couldnt come up with what i am looking for...

I have the boomslang dpfi->mpfi obdo to obd1 conversion harness and i am working on wiring the dizzy i end up with 2 wires off the obd1 dizzy plug and am searching on where to run them too they are blue/yellow and blue/green

Boomslang instructions say the following:

• DPFI vehicles ONLY: Splice the blue/green wire and
blue/yellow wire coming from the 4-position connector on the
supplied sub-harness to the blue/green and blue/yellow wires
on the distributor plug (engine side).

there is neither a blue/green of blue yellow on the harness i got from them.. unless i am miss reading this


Thanks
 

·
Registered
1990 CIVIC
Joined
·
989 Posts
my guess follow the c1 and c2 wire follow them maby they didnt use stock colors?
those two got to the dizzy



hope it helps
 
1 - 7 of 7 Posts
Top