Honda D Series Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
11 Posts
Discussion Starter #1 (Edited)
I am new to this forum and building my first motor. i have is t3/t4to4e with 38 mm wastegate. i wanted to see what i would need to get for the internals of the motor to reach my goal

Parts i was looking at
VITARA Pistons 75.5
Eagle HBeam Rods
Motor will be bored balanced

If i would need any more internals to reach my goal plz let me know
 

·
Registered
Joined
·
249 Posts
I am new to this forum and building my first motor. i have is t3/t4to4e with 38 mm wastegate. i wanted to see what i would need to get for the internals of the motor to reach my goal

Parts i was looking at
VITARA Pistons 75.5
Eagle HBeam Rods
Motor will be bored balanced

If i would need any more internals to reach my goal plz let me know
Here is a good place to start: http://www.d-series.org/forums//showthread.php?t=77291

That should get you started.
 
1 - 3 of 3 Posts
Top