Honda D Series Forum banner

1 - 12 of 12 Posts

·
Banned
Joined
·
47 Posts
Discussion Starter #1
ok guys was wondering, im going to the junk yard and will be looking for a z6 complete intake and is there anything else I need to grab while im there to make the swap complete? like the ecu or anything?
 

·
Registered
Love the Civic
Joined
·
1,817 Posts

·
Banned
Joined
·
47 Posts
Discussion Starter #3
I seen that lol, and that's for an A6 is that the same parts I need if I was to use a z6?
 

·
Registered
Love the Civic
Joined
·
1,817 Posts

·
Banned
Joined
·
47 Posts
Discussion Starter #5
ok so entire mani, the ecu and the dizzy.... would you think I might need the harness to?
 

·
Banned
Joined
·
47 Posts
Discussion Starter #7
ok beer im just wondering all I need to get while im at the junk yard so I don't have to go back again since I live over an hour away from the yard..

OK cool just running the 2 wires to the ECU will work
 

·
Banned
Joined
·
47 Posts
Discussion Starter #11
ok I picked up a p32 intake from the junkyard today only z6 motor I found in the entire yard lol, spent 90 bucks on the entire intake and just missing one piece from it on the fuel rail. and mitch I will be running the obd1 z6 stock injectors that I bought with it.. also would I need a intake gasket for a B1 or Z6?
 

·
Banned
Joined
·
47 Posts
Discussion Starter #12
almost got a B7 intake but didn't really know if it was the same process since it came out of the same car as the Z6 did
 
1 - 12 of 12 Posts
Top