Honda D Series Forum banner

1 - 8 of 8 Posts

·
Registered
civic lol
Joined
·
727 Posts
Discussion Starter #1

is all i need now is the z6 engine harness to activate vtec?i have my ecu chipped to vtec.the head is a Z6 and the block is A6 and everything else is stock off the d15b7...appreciate your help thx
-Adam
 

·
Registered
Joined
·
2,573 Posts
you need to run 2 wires from your ecu 1 to the vtec sol and 1 to the vtec pressure switch.
unless your car is a 92 then you just need to plug in the p28 and then plug the z6 engine harness in to the shock tower as all 92's were wired for vtec from the shock tower to the ecu
 
1 - 8 of 8 Posts
Top