Honda D Series Forum banner

1 - 8 of 8 Posts

·
Registered
Joined
·
11 Posts
Discussion Starter #1
Hello I'm new here at the D-Series site and I have a question.
I own a 96 Civic dx Manual and I want to go Vtec, I just want to know if I can be able to swap a D16Z6 Vtec Head on that block and what parts do I need to do the swap, I will appreciate the comments.
Thanks.
 

·
Registered
Joined
·
11 Posts
Discussion Starter #2
Hello I'm new here at the D-Series site and I have a question.
I own a 96 Civic dx Manual and I want to go Vtec, I just want to know if I can be able to swap a D16Z6 Vtec Head on that block and what parts do I need to do the swap, I will appreciate the comments.
Thanks.

Any body!
 

·
Registered
1996 Civic Type DX
Joined
·
4,167 Posts
Not for the Y7 block it hasn't.

Z6 or Y8 IM/TB
Z6 dist
P28 ECU
obd conversion harness
repin the dist connector
t the coolant lines as the y7 waterneck only has one nipple versus 2 on the z6
add a 16* mark on the crank pulley and set timing using that
 

·
Registered
Joined
·
11 Posts
Discussion Starter #6
1 - 8 of 8 Posts
Top