Honda D Series Forum banner

1 - 9 of 9 Posts

·
Registered
Joined
·
26 Posts
Discussion Starter #1
hey i searched a lot but didnt find what i was looking 4.

i hope u can help me guys.

my first question is:
whats the highest hp i can get out of a d16 with stock internals and a turbo?
what do u guys think about vitara pistons?
my vendor said that i can get more hp out of a stock b engine than out of a stock d eninge?

i hope u can help me.
i got an offer for a d16 block with internals but without oilpan.
the block has 85000 KM on it. the offer is for 100 €.
then i want to get a minime... so i can complete the engine.
my vendor said that i have to get new bearings , rods and pistons...
these parts i would get for 900 € ...


i hope u can help me
 

·
Registered
Acura TL-P
Joined
·
6,837 Posts
hey i searched a lot but didnt find what i was looking 4.

i hope u can help me guys.

my first question is:
whats the highest hp i can get out of a d16 with stock internals and a turbo?-depends on the setup, stock I'd look at a max of 200-250
what do u guys think about vitara pistons? they are proven to work well
my vendor said that i can get more hp out of a stock b engine than out of a stock d eninge? that is true, mainly because a B makes more power stock anyway
i hope u can help me.
i got an offer for a d16 block with internals but without oilpan.
the block has 85000 KM on it. the offer is for 100 €.
then i want to get a minime... so i can complete the engine.
my vendor said that i have to get new bearings , rods and pistons...
these parts i would get for 900 € ... can you convert that to American $$

i hope u can help me
 

·
Registered
Joined
·
26 Posts
Discussion Starter #3 (Edited)
the offer for the rods pistons and bearings contains:
acl race bearings, eagle rods , jc pistons for 900 € 1250 $

and the block will cost 100 € 138 $

i think the last trading rate was 1 €= 1,38 $


what do u guys think... are 250 hp enough? or do u think its better to put in high quality parts to start a turbo project?


what do u guys think about this ebay auction? http://cgi.ebay.com/ebaymotors/D16-Civic-CRX-Si-Turbo-Engine-Kit-Pistons-Rods-Gasket_W0QQcmdZViewItemQQcategoryZ33623QQihZ008QQitemZ180160263684QQrdZ1QQsspagenameZWDVW

do i need more than the parts in this offer?
 

·
Registered
Joined
·
26 Posts
Discussion Starter #5
well eh...
im from germany.. and i dont know if they ship to germany.
are these rods good enough?

can u give me links where i can get a set for the engine? piston rods bearings and so on?
 

·
Registered
Joined
·
26 Posts
Discussion Starter #8
uff... its so hard for me to get it all;)
the language and so on.

i dont know what to do.
ill only get up to 260-280hp with full boost and 200hp for the daily drive.
what do i need to change in the engine and can u assamble a kit for me which arrange my concept?!

har i would spend u all a lot of beer if i could. ;) but i live in germany ;);)

please help me
 

·
Worst Mechanic Ever!
EG
Joined
·
2,915 Posts
har i would spend u all a lot of beer if i could. ;) but i live in germany ;);)

please help me
I like this guy already. :D

There is a member here, FJT, send him a message, he can hook up up with a good set of pistons, rods, and bearings that will be cheaper than what you have posted, AND easily hold up to the power goals you described. He will probably ship to germany, just might cost extra.

260-280whp, I would say Tuner toys rods and Vitara pistons.
 
1 - 9 of 9 Posts
Top