[DakaR]

Didn't quite know where else to put this;

I'm gonna have to dissamble my '94 EJ2 cyl head, due to change of bad valve seals (exhaust/intake). I have absolutely zero experience with honda engines as I've recently changed over from BMW.

So, I'm planning on replacing all possible parts that will help my poor car run cleaner. So I'm asking for a 'list' of basic things regarding the 1,5 LSI engine;

What type of spark plugs used?
Motor oil? (Using full synthetic 5w-30 now(?))
How much oil does this engine fit?
How much water does it fit?
Where are the oil filter and petrol filter located?
And does anyone have a 'nm tightening' list of cylinder head and top cover?

I'm not trying to be 'lazy', I just have a hard time trying to collect info about this engine as it isn't very common from where I live.

Thanks in advance,
Any tips/help about dissambling this head are being highly appreciated.

Thanks a bunch,
- DakaR

 

[BeerDrinkin]

Everything I will provide is US spec

3.5 qts oil
~3qts water approx.
~2qts manual trans fluid (5w30 motor oil)

The head torque sequence is like so
----------
8 6 2 4 10
9 3 1 5 7
___---___
^
front of car here

22ft/lb then final 47ft/lb final pass.

Spark plugs:
D16A6/D15B2 NGK Plugs: Gap @ .044
Standard: BCPR6ES-11
V Power: BCPR6E-11
G Power: BCPR6EGP

Thanks to xotic_crx for the plug info.

The rest is all from google and 2 mins of time

 

[DakaR]

Everything I will provide is US spec

3.5 qts oil
~3qts water approx.
~2qts manual trans fluid (5w30 motor oil)

The head torque sequence is like so
----------
8 6 2 4 10
9 3 1 5 7
___---___
^
front of car here

22ft/lb then final 47ft/lb final pass.

Spark plugs:
D16A6/D15B2 NGK Plugs: Gap @ .044
Standard: BCPR6ES-11
V Power: BCPR6E-11
G Power: BCPR6EGP

Thanks to xotic_crx for the plug info.

The rest is all from google and 2 mins of time

Thanks a bunch, helps a lot