Honda D Series Forum banner

1 - 14 of 14 Posts

·
Registered
Joined
·
309 Posts
Discussion Starter #1
what up fam im new to the site as a member but ive always used it for info but i cant find any1 who know whats the problem with my motor but heres the problem
its a 92 vx with a jdm d15b vtec motor boosted
eversince about 3 or 4 weeks ago the car just started kickin out light grey almost white smoke.when i start the car up i get no smoke but once the car starts warming up it starts to smoke.it smoke during regular driving and at idle as well but when i beat on the car the smoke goes away but once i release the pedal and hit it again the smoke comes back
 

·
Registered
Joined
·
309 Posts
Discussion Starter #4
im not gettin any signs of that...like i dont smell anti freeze from the exhaust,its not over heatin,and none mixin in with my oil
 

·
Registered
Joined
·
2 Posts
my sohc zc does the same thing its prolly a headgasket. check if your oil looks like a chocolate milkshake rather than black or in my case i opened the oil cap and shined a flashlight in the head and saw a nice green stream floated around the lobes.
 

·
Registered
Joined
·
1,444 Posts
yea proably valve seals i always think headgasket as soon as i hear white smoke but if u dont have mixing or smell it burning then i guess its not that
 

·
Registered
Joined
·
309 Posts
Discussion Starter #8
i think its the seals but imma double check the oil 2 be positive.....if it is the seals were can i order some new 1s being the fact that my motor is a d15b and some people tell me that that valves on that motor are different from the other d-series but in dont know it thats true or not cause other people tell me its the same as the rest
 

·
Registered
Joined
·
97 Posts
just a guess but maybe the one's for a z6. I belive every thing in the head is the same expect the rocker assembly
 

·
Registered
Joined
·
309 Posts
Discussion Starter #10
cool i guess imma take it apart and compair it with one of my z6 heads and see how they match up
 

·
Registered
1991 crx dx
Joined
·
221 Posts
i just pulled my head because of the suspicion of blown hg, and it was blown, i had could not see a difference in my oil according to the dipstick but had been losing water in small amounts for awhile. sometimes you cant tell if its the hg or not due to a small warp or gasket that closes it self off at times. but one sure way to see for sure is pull the valve cover off, because when i did it looked as if someone had take a jar of peanut butter and claimed rocker assembly as bread. just something to check
 

·
Registered
Joined
·
309 Posts
Discussion Starter #14
cool yea imma change the hg anyway cause im gonna get a thicker metal 3layer one to lower the compression so if it is that it will be replaced either way...but i didnt think of it like that...thanx
 
1 - 14 of 14 Posts
Top