Honda D Series Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
98 Posts
Frist off you need to check if your piston's have 4 valve releaf. If they do then you'll need the head from a z6 or y8 and the ecu from the 92-95 ex/si and wire up vtec. I will also recomed you use the z6 intake mani and exaust mani, the cx's are tiny. You will also need the timing belt for the head you use. And remove the lil oil thingamabobber inbetween cyl #2 #3. i perfer to use the y8 head in this swap because you can use you dizzy, if you use the z6 head you'll need the z6 dizzy.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top