Honda D Series Forum banner

1 - 5 of 5 Posts

·
Registered
rsx
Joined
·
120 Posts
Discussion Starter #1
ok so ive been here a while and slowly putting my d16z6 together.. so i had to bore it to 76mm.. so i was wondring... if my vitaras are 76mm and i want to set my p2w clerance.. and end gap what should they be at?

i was thinking 0.018 for top

0.020 for 2nd

0.025 for the oil rings

and p2w clerance set at 0.003...

dose that sound ok ?

thanks for the help..
 

·
Registered
rsx
Joined
·
120 Posts
Discussion Starter #2
Sorry forgot to add that I plan on running 20 lbs of boost looking to make 350+ hp
 

·
Registered
Love the Civic
Joined
·
1,817 Posts

·
Registered
rsx
Joined
·
120 Posts
Discussion Starter #5
I searched for like an hour and found specs... But I wanted an opinion from a couple of people who have build a d-series.. I've build a few b series and h and my k twice... Never a d.... But thank u sir anyway
 
1 - 5 of 5 Posts
Top