Honda D Series Forum banner

1 - 12 of 12 Posts

·
Registered
Joined
·
951 Posts
Yes that 2" round steel tube on the back of the block under that black box, under the intake. Above the oil filter. I think d16a6 only have 1 nipple on it to transmission side but the z6 block has 2 nipples on that tube, one on both sides. The side near the timing belt i have running to my iacv, and the other i think goes to the itake manifold where u took a pic of.
 

·
Registered
Joined
·
5,975 Posts
Discussion Starter #12
my situation was a bit more complex than what i made it out to be. so the picture was exactly what i needed. I added an oil cooler? (a small cylinder that attached between the oil filter and the block) to the D16Z6 from my D15Z1, so that threw me off. but i just finished rerouting all the hoses. thanks a whole lot for the pic
 
1 - 12 of 12 Posts
Top