Honda D Series Forum banner
1 - 1 of 1 Posts

·
1.8 nawz powa
Joined
·
7,841 Posts
When you were doing your "quick shfiting" you might have made the rod going into the master cylinder loose and now you have to push farther down to get the clutch to work. Crawl under there and make sure on the back of hte pedal the rod and nut are all the way out and tight.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top