Honda D Series Forum banner
1 - 9 of 9 Posts

· Registered
Joined
·
10,091 Posts
The funny thing about Will's post is, the expensive way sucks donkey schlong

the wrench method is a simple masterpiece. works 100% of the time.
 

· Registered
93 Civic HB SI, 95 Civic HB CX
Joined
·
2,830 Posts
My $0.03 solution is an old fuel tank strap with a few holes drilled in it. You could literally use any piece of metal with some holes drilled in it, like angle iron, flat stock, etc.

One hole in the piece of metal to a block-bellhousing bolt, another hole in the piece of metal to a flywheel pressure plate bolt hole.

Get it situated so that when you torque the flywheel bolts, the tension on the piece of metal is a pulling force.

By using bolts for this, there is no chance it can ever slip off.
 
1 - 9 of 9 Posts
Top