Honda D Series Forum banner

Check engine code 7 OBD0

4323 Views 4 Replies 4 Participants Last post by  bryan4d
hello guys, my car was running fine and suddenly my check engine went on giving me code 7 and 14 (tps and iacv) and the throttle response got weird, like when i tap the gas pedal the revs first go down and then it revs up and because of this its difficult to not stall sometimes. It also idles pretty low.
so... i cleaned the IACV because it had happened to me before and the check engine went off but after minutes of driving the car, the check engine light comes on giving me this time only code 7 and with the same problems.

should i replace the TPS?
1 - 1 of 5 Posts
Test before replacing, not sure if you got a link already my iggy list is up in here. If you have a voltmeter you can test the tps.

HELP QUICK PLS, Code 7 on OBD0 b16 - Honda-Tech
1 - 1 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top