Check engine code 7 OBD0

4333 Views 4 Replies 4 Participants Last post by bryan4d, Jun 17, 2015

bryan4d

Discussion Starter · Jun 15, 2015

hello guys, my car was running fine and suddenly my check engine went on giving me code 7 and 14 (tps and iacv) and the throttle response got weird, like when i tap the gas pedal the revs first go down and then it revs up and because of this its difficult to not stall sometimes. It also idles pretty low.
so... i cleaned the IACV because it had happened to me before and the check engine went off but after minutes of driving the car, the check engine light comes on giving me this time only code 7 and with the same problems.

should i replace the TPS?

Save

1 - 1 of 5 Posts

Thehagerbomb

· #3 · Jun 16, 2015

http://troubleshootmyvehicle.com/honda/1.6L/how-to-test-the-tps-sensor-1

Link for checking TPS. I use a small paper clip to probe into the connector instead of buying a fancy through wire probe. Hope this helps.

Sent from AutoGuide.com Free App

Save

1 - 1 of 5 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

Top Contributors this Month