[dannyboy232]

Hello I need some help with degreeing my cam. It’s the speed factory street savage cam and the specs that come with it are not matching up with that I’m getting. I’m wondering if the specs they give are only for the vtec lobe? That would be getting annoying because I don’t want to have to pull the rocker apart to lock vtec. Any and all help with be greatly appreciated.

what I’m getting
intake opening with .050 lift 16•ATDC
Closes with 13• ABDC

What speedfactory calls for
Intake opening with .050 lift 10.5• BTDC

 

[dannyboy232]

would help to know what head.

using an adjustable cam gear?

I’m sorry about that, my head is kinda hurting from trying to understand what’s going on. It’s a y8 head and yes I have an aem cam gear on it. I can get the correct lobe center with -3• retard but the degree when they open is way off from the sheet