So im looking for a 2in donut flange to weld onto a cat to mate up with a header. I did a quick google search but that got me no where. Anyone know where i can get one of these. In stainless preferred.
do your research to be sure it is what you need. Summit rapes on shipping, see if a local place can get it. I have a Car-X local to me that "caters" to SCCA folks who might for racing reasons drop the cat.
Their normal hours are 8a-7p, except on Thursday by appointment. Normal Thursday hours are 8a-5p......for legal reasons
Need a second opinion here:
I have an 89 CRX Hf that had working AC, not amazing, but it worked. I assume it was R12 as there were no converter nipples going on.
A while back someone hit let head on, broke the radiator and mangled the condenser, but didn't rupture it.
I decided since I was...
Long time reader, first time poster.
So, I have a 1995 Civic Ferio Vi, with a D15B (two stage vtec) engine in it. Imported from Japan, so all JDM parts.
But... Something backed off the bolt on my main pulley (AKA harmonic balancer), and it got damaged. So, now to find one.
For you say anything I've done the search of done four searches and after getting to the 20th page I give up . My plan is to use a D15B7 and put the Max peating rod rods which are higher at 134.5 mm which is only at half a millimeter larger than stock rods. Along with this I plan for a z6 head...