Honda D Series Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
118 Posts
Discussion Starter #1
i've plans in the future to build a built boosted sohc vtec,,, but i've no turbo experiance at all,,,
so, i've enough bits and bobs around the shop to put together an entire engine,,,
here's where i'm up to so far,
1.3 carb bottomend,
1.6 non vtec head,
Jdm D15B intake mani,
sohc vtec loom
1.4 ek exhaust manifold:

hoping to just re-drill the flange and bolt the turbo stright to it :)

TD04 turbo , with a bit of left and right wiggle,,, just a bit, hoping it doesnt scream, got it for free, cant complain,

next i've to source some lines for the turbo, then i'll be gettin it mapped on chrome,,,

now, the question is,
what sorta boost do ya reckon is safe??? and what sorta boost is pushing it,,, but it'll run for a trackday?

cheers,
Joe,
 

·
Classic Man
Civic
Joined
·
16,355 Posts
i posted up images of a T3 flange layed over that two piece manifold setup a few years back.

its almost a perfect match.

it will work great.



edit; sentry beat me to it. hah
 

·
Registered
Joined
·
118 Posts
Discussion Starter #5
deadly,,,, pickin up the mani 2moro evenin, will post pics of it assembled,,
i know that d series engines run happy as at 7psi while stock, n a pushin it to 10 with a good tune and it'll live, but there's almost no info on 1.3 turbos,,, so,,,, i'll try again,
any one got any advice on what sorta boost i can run?
 
1 - 5 of 5 Posts
Top