Honda D Series Forum banner

1 - 20 of 186 Posts

·
Registered
Joined
·
4,585 Posts
Discussion Starter #1 (Edited)
berettagtz117 claiming this thread as my own 2!! 56k hell no!!Updated 22 JUly!

Other builds.
http://www.d-series.org/forums/showt...6&page=1&pp=20


I thought it would be nice to have since it seems like I am doing something new everyday and also doing something for somebody, so I will post pretty much everything I do to my cars from start to finish, and what I have done for others, along w/ other bolshit and stuff. It may take a couple days to get it rolling but eventually it will very filled w/ pics.. Enjoy all and rep as you like!

The beginning of "KILLERB" project
Hitting the Homemade paintbooth to tear down paint!






Sensitive content, not recommended for those under 18 Show Content


 

Attachments

·
Registered
Joined
·
4,585 Posts
Discussion Starter #3
Still in garage getting painted!


Letting it dry!

Damn look @ the oranges on the hood!

black is done now ready for lots of Wetsanding :(

Final product! Not Bad For Adams First paint job ever attempted after School!
 

Attachments

·
Registered
Joined
·
4,585 Posts
Discussion Starter #7
Gotta love the red engine Bay!:fag:

Ugly ass setup damn wires everywhere.. What to do ..

Godamn this thing is all riced out! Time to change this up you think...

Turns out my motor is knocking really bad on bottom end.?? Sounds like Spun bearing to me.. Sure enough it is .. Lucky me I had extra Z6 motor lying around for Future build which is too come in a matter of time.. You will see.. :)
But here is new motor after taking shitty one out as you can see I cleaned up all the shitty wiring along w/ flat blacking the whole engine bay! And added some new parts.. New DC header!

SKunk 2 Manifold hmmm
 

Attachments

·
Registered
Joined
·
4,585 Posts
Discussion Starter #8
Sorry if pics are big it wont be like this much longer..
Anyways I decided to change it up a little so I put Stock headlights back in, and added CF hood!



Also put Stock tailights back on!!

Back in the shop for New front Disc "brembo crossdrilled rotors" Aem Pads!!

Shit lets go ahead and do new suspension too! Tokiko Illumna R 5 Adjustable's w/ Skunk 2 Springs :)

Shot of New Rotors w/ same ol Rota's.. :) "I should be a Rapper" ;)
 

Attachments

·
Registered
Joined
·
4,585 Posts
Discussion Starter #9
Well its motor build time!

Time to pull motor!

Where did it go?

:(

Got some Head!


Off to machine shop it all goes!!!
 

Attachments

·
Registered
Joined
·
4,585 Posts
Discussion Starter #10
So what am I going to drive while its down.. hmmmm

Definately not my 02!!!


The good ole 91 Sedan!! Cost me 350 for this biatch! All it need was a new ignitor!

Interior shot

Of course I did my MPFI swap! W/ SI cam :) You know how I role..

Rear end!
 

Attachments

·
Registered
Joined
·
4,585 Posts
Discussion Starter #11 (Edited)
Woohoo Motors back!!!!
Awwww....:beer: Need lots of this!
SRP 10.5 Pistons mated w/ Eagle rods and ACL bearings!!



New OEM water Pump!

ARP baby

Skunk 2 Springs/Retainers High comp Valves!


Motor work done!
Bottom end:
10 over bore
Crank girdle and block knotched
Eagle rods
ACL bearings
SRP 10.5 high comp pistons
All new OEM gaskets
OEM water pump
OEM Oil Strainer
Crank regrind
Top end:
Valve Job
Skunk 2 High comp Valves OEM size
Skunk 2 Titanium Springs/Retainers
Exospeed stage 3 regrind :) NICE
Head resurfaced 7thousands.. Little warpage :(
eldebrock Cam gear
Boltons:
DC 4-2-1 header
Skunk 2 Intake manifold
B20 TB
Fake J's Intake Along w/ AEM Cai for backup
Tsudo N1 catback w/ testpipe "not installed yet"
Ignition:
Accell Plug wires
MSD 6A Not installed
MSD Dis Cap Not installed
MSD blaster 2 coil Not installed
Drivetrain:
S20 tranny SI
ACT HDSS clutch
ACT streetlite flywheel
Tuning:
Chipped P28
VAFC 2
Might have missed some stuff.. Catch it later..
 

Attachments

·
Registered
Joined
·
4,585 Posts
Discussion Starter #12 (Edited)
Head Shot!

Skunk2 Valves~Resurfaced head w/ valve Job!

Bolted down! ACT Heavy duty Street/strip clutch w/ Streetlite Flywheel

So fresh so clean!

Head assembled w/ JG 85VT80 Cam Lets drop her in!
 

Attachments

·
Registered
Joined
·
4,585 Posts
Discussion Starter #13
Dropped right in!



Bolton time! Dc header 4-2-1 Skunk2 mani w/ b20 TB!!



Finished product!
 

Attachments

·
Registered
Joined
·
4,585 Posts
Discussion Starter #14
Looking good!



CF duckbill WIng came in!

Another shot! RE works Strut bar

VAFC 2 Installed along w/ Skunk 2 Shift nob!

Wing installed! I know the car is dirty.. Wing is blingin though!
 

Attachments

·
Registered
Joined
·
4,585 Posts
Discussion Starter #15
CTR boot looks good!

Good view!

Drice ified no more gay lip!



Some county ass place??.. :werd:
 

Attachments

·
Registered
Joined
·
4,585 Posts
Discussion Starter #17
jimmyb34 said:
damn man you have got a shitload of pics.
Nice progress on this thing and nice pictures.
Man I know and I am not even close to being done! I am getting so tired :)
 

·
Registered
Joined
·
4,585 Posts
Discussion Starter #19
russianwonder32 said:
man i love ur engine build.. that is a beast.. but ... y did u do 2 tone?
Thanks man! Ya I am thinking about painting it RSX desert Silver now..??
 
1 - 20 of 186 Posts
Top