Honda D Series Forum banner


1096 Views 11 Replies 7 Participants Last post by  immajackuup
Hey kinda need some diagnostic help here. A while back I put GC Coilovers and KYB AGX shocks on my front end. I set the height at about 1" below stock. After several months of using the car as a daily driver i noticed that the car was hitting really hard on bumps and decided to take a look at the shocks. To my horror I saw that my new AGX on the passenger side was bent at the top where it enters the shock tower. Any ideas what would shocks to lock up and bend like this? I later noticed that GC has a different set for each shock type, any ideas why they would do this, and could the wrong set cause shock damage like this? Thanks for any help!
1 - 2 of 12 Posts
did you dukes of hazard the shit?
I did that with my civic that have agx and no bent agx shaft here.:eek:
take some pics of your bent strut.

i betcha when you were fitting it you cranked it to the side to get it over the LCA. just a hunch
1 - 2 of 12 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.