Honda D Series Forum banner
1 - 10 of 10 Posts

·
Registered
Joined
·
1,029 Posts
Discussion Starter · #1 ·
I tore down a z6 block i just bought. Everyone says the oem bearings have colors on them but these dont.







This is a picture of two little spacers i pulled from the engine when taking out the crank. should i purchase new ones of these.



Pics of the block tore down. still needs a good cleaning



 

·
Registered
Joined
·
2,405 Posts
the "spacers" are thrust bearings VERY IMPORTANT
I hope you marked everything down on where each bearing came from. If not you gotta start from scratch and its alot more work.
 

·
Registered
Joined
·
510 Posts
If I had it apart I would go ahead and change them. You're going to all that trouble taking it apart and the internals don't cost that much.
 

·
Registered
Joined
·
1,029 Posts
Discussion Starter · #4 ·
no trust me im planning on changin the bearings because i have no idea how many miles are on them.

but what im wondering is why they dont have colors on them like everyone says they should.
 

·
Registered
Joined
·
510 Posts

·
Registered
Joined
·
2,405 Posts
I suggest you let this thread die and stick to your thread in the noob forum.

Those are not honda bearings therefore they do not have colors and will do you no good in that matter. END OF STORY
 
1 - 10 of 10 Posts
Top