Sorry for sounding like a noob, and also asking a question that probably had been asked. Let's get to it. I have read and read a lot of forums on the subject of wiring wbo2(wideband) to ecu. But haven't found a 100% straight up answer. So how do you wire the wbo2 to my crome chipped ecu. I read run the white wire (0-1v output) to pin d14. Car is obd2b w/ harness to obd1 so how can I run to d14 w/ obd2b. There is no d14. Another thing I'm not running any stock o2 cause wb is taking the place of. Thanks for any info.