Honda D Series Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
1,505 Posts
Discussion Starter #1
I am in need of an a6 crank, I do not want to purchase one that has been micro polished, or one that ever had a spun rod bearing. Does anyone know where I can purchase one that is new or pulled from a running engine? I see autozone, advance auto parts, napa etc sell them, they are made by a company called Hi-tech. It states they are remanufactured? Does this mean they had spun bearings and were polished out?
 

·
Registered
Joined
·
1,079 Posts
You might try your local craigslist or hondamarketplace forums for a d16 short block.
When you go to look at it make sure the oil pan is off and check all 4 rods for slop or play.
GL!
 

·
Screwy lewy in red
Joined
·
1,546 Posts
You might try your local craigslist or hondamarketplace forums for a d16 short block.
When you go to look at it make sure the oil pan is off and check all 4 rods for slop or play.
GL!
Local craigslist has some good stuff. For some good prices. Or try your D-series members someone have a spare they can part with for a great price.
 
1 - 3 of 3 Posts
Top