Honda D Series Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
2,452 Posts
yes you can have that power levels and still be reliable.
My Y7 had 266whp and 240lbs ft and it was daily driven 24/7

In terms of Building i just had Pistons and rods,Head studs and a Block guard...Everything was pretty much stock in the block and head..I used a Y8 tranny
 

·
Registered
Joined
·
2,452 Posts
I sold the car but when i had it it ran:

12.4 @ 111mph(best trap 112) @ 18 PSI..full interior,full exhaust, 93 octane pump gas and stock Y7 head.

Car weight 2600lbs with driver.
 

·
Registered
Joined
·
2,452 Posts
the head wouldnt make power over 6800 rpms since it was stock I revved it up 7200rpms on the OEM EX tach(OEM tachs are off)... On the dyno i revved to 7500 rpms on the tach and the dyno read 7000rpms max.

No valve float
 
1 - 6 of 6 Posts
Top