[89SuzukaBlueMetallicHatch]

whats going on guys, well when i got my 89 civic hatch, the rear mount the one that bolts into the tranny is only held on by 1 bolt, the other 2 bolts are broke in the tranny, i tried to use an easy out to take the bolts out, but i cannot get those 2 broke bolts out, i was thinking about drilling the bolts out of the tranny, or drilling the the bolts to nothing, and then tap and dying the spot where the bolts are, does any one have other suggestions that would help i would greatly appreciate it.

Thanks

 

[areskzc]

I'll go for option one, is a bit harder but still doable. Drill them out the tranny not to nothing.

 

[this SOHC]

drill a whole and use one of those reverse bits so it can unscrew itself.

 

[TonyTek]

reverse bit kit...i picked up a set including the drill bits for like $20 at Sears...

-tony

 

[89SuzukaBlueMetallicHatch]

ok thanks guys i do appreciate it very much, just picked up a reverse drill bit set , ill let yall know how it goes, right now its 10:36 CST, just waiting for my motor to cool off and the garage to warm up, and then i will start to get the bolts out, thanks for all the help and knowlege,

thanks