[BLACK-KNIGHT]

I need one exhaust valve with valve keepers. Its for a a6 vtec head. I need a hf mani to dsm turbo adapter plate. Stainless steel oil feedline kit for d15b7 to t-25 feedline and if you have drainline thats a plus, but i need the feedline. Pm me and let me know how much.

 

[BLACK-KNIGHT]

bump i really need this stuff guys help me out

 

[AMkrew_1]

Well, which is it? You said a6 but then you said vtec. I have valves and keepers for a z6/y8/y7/y5 head, but I'm not sure about a6/b5 valves. Let me know which one you need.

About the feed line, do you need the whole setup from block fitting to turbo connection? Look at stealthmode lines. Also look at mcmaster.com and summitracing.com for decent prices.

-josh-

 

[BLACK-KNIGHT]

I am a bit dee deee it may have been a z6 i dunno. I know its not the y8 its the other vtac head, z6 i believe?

 

[AMkrew_1]

I've got one. I can ship you 1 exhaust valve, cleaned, with the face grinded, ready to install with 2 keepers for 12.00 shipped

Let me know at: AMkrew_1(at)yahoo.com

-josh-

 

[BLACK-KNIGHT]

email sent
_________________________________________________________________

Yes i need the whole feedline kit from turbo feed to block.

 

[BLACK-KNIGHT]

bump

 

[AMkrew_1]

Replied.
-josh-

 

[SpoolinSol]

check out bmcrace.com or http://cgi.ebay.com/ebaymotors/HF-Manifold-Turbo-adapter-plate-to-14B-16G-15G-T25_W0QQcmdZViewItemQQcategoryZ33742QQihZ004QQitemZ140075837992QQrdZ1QQsspagenameZWDVW for the adapter plate (i've bought 2 of those ones from eBay; but you don't have to drill out any threads on the BMC plate..) x2 for stealthmode.com oil lines (~$80 for the fitting, feed, and drain line)

 

[Speedjunky01]

I have a full stelth mode feed and return like for a t3 I belive.

 

[BLACK-KNIGHT]

bump

 

[rattmann316]

tunertoys.com


and thats a good price for that valve!

 

[BLACK-KNIGHT]

dont need the valve no more just need the other stuff