Search Results for ‘springs’

So I'm in the market for a set of Swift springs but I have no clue of what the diameter would or which diameter to get. The Swift Springs come in 70mm ID, 65mm ID and 60mm ID. I would imagine that their 60mm, but just to be safe I would want to hear what others have gotten or just what the OEM...

Hey Guys! I've got my car in decent running order. I need to make some changes on how it sticks to the ground. I've been looking at some lowering springs that will provide a performance feel while still being semi comfortable. I found 2" Lowering springs with skunk2. Spring rates as...

I have a set of 2" Tokico lowering springs from my buddy. I have heard that you do need new shocks/struts, and I have also heard that you don't. I'm assuming I should probably get new shocks/struts before attempting to lower my 1995 Honda Civic EX Coupe since the springs are 2". If that is...

my car is a 90 crx si with 250,000 miles on the chassis, recently it makes a squeaky noise as i am turning the steering wheel towards the left, usually when going slower speeds, such as manoevering around a parking lot and stuff like that, it sounds like its coming from...

Hello d-series, First time attempting to sell something here. Recently I replaced my springs/dampers for something a bit more performance oriented. Looking to sell what came off, springs and dampers with minimal use(5kmiles). They were installed on a 99 civic coupe Nov '12 and removed in May...

was looking into these lowering springs for my ej1. they give a 2.5" drop in the front and a 2.25" drop in the rear. the spring rates are 199 lbs in the front and 148 lbs in the rear. My question is are these rates low enough to use with my stock struts? I would be making a set of extended top...

Ok, I've been having issues with the stock springs being a bit too squishy with a second person in the car. I could care less if it rides like a go cart as long as I'm not scraping my header against the ground every time I hit a little bump with a passenger. Any recommendations for a stock...

we have all seen the no name ebay lowering components all day long. in the past i have used the "coilover" version on my 98 ej8 for mild performance and appearance and have been happy with the result considering the cost effectiveness. (good bang for your buck). and now i have a new budget build...

Hello; Alright so by this post I am not bashing or talkin crap on any company. The problem I have is that when it comes to the cylinder head parts, I don't want to get a bad part to have it mess the rest of my head up. Unfortunately, when looking for parts (Mostly cams) there is a sales pitch...

i have an 89 Honda Civic Hatchback. I want to spend as little money as possible, but get some quality coilovers or lowering springs that will put my car on the ground. here's my barriers: stay around 100$ i don't care about ride want them to last at least a year i don't want them to increase...

Anyyone interested? i got a set for 4 tein s tech springs, i used them for about 3 months and took em off because i wanted to just slam my ek. i bought some coils so these are just laying aroundd, they have really good ride quality and are good for if you commute alot. just pm me for more info...

so a friend of mine gave me a completely bare head that he doesnt need anymore and i need suggestions on what would be best to put in it. i want a strong valvetrain to be able to handle alot of boost and higher rpms. should i peice the parts together or does anyone know of a good total kit or...

I'm planning to use this summer to replace my stock suspension with some performance springs/shocks that are adjustable. The car is a 96 civic ex coupe and it is my daily driver. Im looking more for performance than looks and i like the idea of adjusting the height for winter. I've heard good...

I’m trying to make a good suspension for the conditions here in Alabama that will also adapt to conditions in California, in terms of performance and reliability. That means money, yes, I know. I’m here to do it right the first time. I've done what I could for my braking system (phase one of my...