Honda D Series Forum banner

spark

  1. Audio/Electronics
    Hi All, So ive been working on a Turbo build for a 1992 EG D16Z6 UKDM and ive got it all back together and trying to get it to fire up into life. It is turning over but wont start. Ive got fuel and spark. I have jumped the OBD 2 pin plug and is showing code 0. It is either ECU, MAP or Fuel...
  2. Engine Building
    Hoping someone could share some insight on how to alter this region productively when using Neptune RTP. The Help file is severely lacking in my opinion, and raises many questions, including the attitude of the author. Anyway.. I've attached a JPG with the window in question. "Ignition...
  3. Engine Management
    Okay so I changed my engine in my DC1 Integra. Bottom end went I think. Yet to take it apart to diagnose. Put a new engine in (1.6 ZC d series non-vtec) exact same as old engine. Here are the symptoms: - Engine is cranking over but won't start. - Battery light is on in the dash (wasn't prior...
  4. General Tech
    so i have a d15 1995 eg 4door... car ran but i decided to do a tune up.. so i replaced my spark plugs spark wires and dizz capp.. now when i finished putting everything on the car started and ran really smooth..i tried to start it a week later now it doesnt start?? any idea?
  5. DIY Forum
    Diy dizzy cap and rotor I've decided to use this post as my first full write up so please leave any comments, suggestions, insults and praise (hopefully) in a comment below. The story and symptoms of a no good distributor cap: Keeping in mind it could be a number of other things your having...
  6. Engine Building
    So i had my harness convereted from obd0 to obd1 for my d16z6 with a y8 head. This fixed my no fuel problem fine. But now i have no spark. I had a another dizzy that i put on that i no works and still no spark. What could be my problem? Again, Im new at this so details and pics would help alot. :)
  7. Engine Management
    I have a D16Y7, My car recently broke down. Before it broke down the engine would start to cut out, and lose power. It became more and more frequent until it finally broke down. I used to be able to drive it for a 1/4 mile or so before it would act up and break down again but now it is broke...
  8. Forced Induction
    So i have a problem that i just can't figure out. when I'm driving my car, if i get over 4500rpm with boost, its like i lose spark or power or something. my car lunges forward and its like i hit the brake or something. any ideas? maybe too much boost is blowing out the spark? idk. any help would...
  9. General Tech
    sup DSO i'm in a tight spot, i did all the research i could but i'm at a stalemate. a little back story: civic threw a CEL in the morning when i was leaving for work, idled rough too so i decided to take my wife's car that day and not chance getting stuck on the freeway. when i get home i start...
  10. General Tech
    I have a 94 civic ex USDM with stock d16z6 motor. I had problems getting the ecu to read 10 lbs of boost but now its good. When I test drove the car it ran fine. Turbo spooled up and everything just perfect. But it then backfired and would not start again. When it cut off i looked at the fuel...
  11. Forced Induction
    I have a 94 civic ex USDM with stock d16z6 motor. I had problems getting the ecu to read 10 lbs of boost but now its good. When I test drove the car it ran fine. Turbo spooled up and everything just perfect. But it then backfired and would not start again. When it cut off i looked at the fuel...
  12. General Tech
    so i figured id add this to the mass amount of knowledge on the site. this is straight from ngk's web site and can help peeps decide if they need different plugs and what colder plugs actually do to help the motor. NGK.com Heat range The term spark plug heat range refers to the speed with...
  13. General Tech
    Alright so I left school tonight, my car started with no problem, drove fine. I got home turned the car off for a few minutes. When I went back outside and tried to start the car I got nothing. The power was good but no crank. I dont know much about cars right now, but my father knows a good...
  14. General Tech
    Ya was just wondering, I've stripped my head down and I wanna skim it one night this week, but dunno if im gonna be able to do it with our skimmer at work cuz we have quite a shallow clamp and I think the tubes are gonna get in the way. Ive googled and searched on D-Series about it but cant...
Top