Honda D Series Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-2 of 2 Results
  1. Transmission alley
    So I'm putting my rebuilt L3 hybrid ZC trans back in. All that's left to do is tap in the axle seals (my dumb ass put a screwdriver through the left one when removing it). The bearing and seal kit I bought has one 35mm and one 40mm ID axle seal in it. I could make the 35mm seal work by using a...
  2. Engine Building
    I am getting ready to make my purchase of my Edelbrock Performer X intake manifold. Now I know there are two different part numbers for the 92-95, and the 96-00. The part number for the Z6 is 4754 and the part number for the D16y series is 4756. There is about a $50 difference between the...
1-2 of 2 Results