Honda D Series Forum banner

no start

  1. Cranks, No start, No clue.

    General Tech
    Hello everyone, I tried to put a D16Z6 cam and rocker assembly with locked VTEC on a D16y7. Car didn’t fire up. So I thought it was the cam and new rockers. so I went back to stock and the car still didn’t fire back up. I set #1 top dead center, all the timing marks lined up. Got a new...
  2. No start/Backfire/Bogging

    General Tech
    So I developed a little problem that got so bad the car died and won't start today. The first symptom was I blipped the throttle to rev match and it just backfired super loud and when I would rev the engine hard it just bogged and popped. I thought it was the dizzy so I swapped in my extra and...
  3. Help! Crank no start on d17a!

    New Member Introductions
    First off, long time lurker, first time poster. Secondly, I need some help. This is my last chance to get this car running before the wife convinces me to scrap it. It's a 2001 Honda civic lx with a d17a JDM motor dropped in it about 5 years ago. Around summer of 16 the head gasket blew so i...
  4. Dohc ZC No Start

    DOHC ZC
    Dohc ZC 3rd gen blacktop. p28 ecu with the right basemap. converted to obd1 with respective part changes.(all New) Has spark guaranteed. (Brand spanking new Dizzy) Fixed mechanical timing. Was off a tooth on the intake side. Car will crank and turn over No weird sounds coming from valves. I'm...
  5. 3rd Gen Dohc ZC Dizzy

    DOHC ZC
    Which distributor would I use for a 3rd gen dohc zc that's been converted to OBD1? I know there's the TD43-u. But every one that's selling says it's for the second gen. And I went through two of them already from brand new. Any Suggestions?
  6. 92 civic Vx auto no start

    General Tech
    Car details 1992 civic vw 1.6vtec automatic 4 door Sorry for the first post being a technical one, I am trying to help a friend get his car back on the road. The car will turn over just fine (no tbelt issue) but does not have any spark or fuel pump activity. 5000km ago I replaced the...
  7. Mini me swap help please

    New Member Introductions
    ok i have a 1990 hatch i just finished putting a mini me in and it doesn't start. timing is good and i get spark. small spark at that. it has a brand new distributer, cap, rotor, plugs and wires. all the gaskets are new, water pump and timing belt. im also getting code 8 and 9. help please
Top