OK, i've found bits and pieces to what COULD be my problem. But I'm still having trouble. I have a 97 EX running the stock P2P ECU, I had the Y8 but a rod bearing spun, I swapped the bottom end of a d15b7
Used Y8 oil pump With the crank sensor
Y8 Crank gear
I have a B7 and Y8 Cam Gear-Which One...
Hey guys. I picked up a 99 LX about 9 months ago and have just gotten tired of having no get up and go lol, I'm definitely on a budget so i'v been reading a lot on cheap mods. I work at a bodyshop and recently we a 1998 ex total loss come in. I was able to grab the motor, tranny, p2p ecu, wiring...
I just bought a 90 crx dx. I am looking to either do a mini me or swap out the entire engine for a y8. my question is with reliability and driving style. I am a college student and delivery driver and this car is my daily driver. so the most important thing for me is reliablility. Ive read the...
I recently bought a D15z7 swap not knowing what I was getting myself into. Never got the motor to run right so I have been reading up and tryin gto find a better solution. So this is lookin like the best solution but I need to know if it is possible. I want to use the D15z7 block and swap a...
I had a full d15b7 and spun a rod bearing. Sent crank to get turned and polished. Bought all new gaskets, z6 head, p28 ECU and ready to go.
I'll get the crank back from the machine shop this week and will be ready for assembly.
Using stock b7 rods with p29 pistons in my b7 block with z6...
I recently did a mini-me swap on my Y7 with a Y8 head. I wired everything up and used a P28 and used a write up from JDMU for reference. I have a thread going on that site to try and figure out why it's running so damn rich... so if anyone who's has a clue is willing to help I'd appreciate it...
New to D-Series.org, been on honda-tech for a while now but recently got an ek and decided to build the single slammer it came with while my gsr build is being put together. I'll be using the stock y7 bottom end with a z6 head i got for 50 bucks on cl, needed a vtec solenoid. I got...
Hey im new to hondas but am currently thinking of buying myself one.
I am interested in doing some engine modifications to it in the near future, mainly a mini-me swap and transmission swap.
The 2 cars i would like advice on are;
Honda civic coupe LS 96-99?
Honda civic coupe LSI 92-95
i got a y7 block at the moment and im planning on doing the mini me swap tomorrow. i got a 97 honda civic coupe. has d16y7 engine
the parts i will be putting on:
z6 head gasket
jumper harness obd2a to obd1
but i will be swapping in a 99-2000 civic ex intake...
Honda Civic Cx 1995 mini-me made by me Update of september 6
-10.85:1 compression ratio
-Block d15b7 of honda civic Dx
-Head d16y8 of Civic SI
-Ported and polished head
-Brand new Valves Seals
-Tuned et chipped(chrome) On p28 ecu
-2'' exhaust line