Honda D Series Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-3 of 3 Results
  1. Transmission alley
    ok, i recently wanted to switch out the isb bearing on a replacement trans i picked up. it turned well before i disassembled. when i got the case apart the counter shaft snap ring bearing was loud and loose so i ordered one and finally tonight i got it all back together. before i put the case...
  2. Transmission alley
    I bought this tranny being told that the ISB was bad, and apparantely it sometimes grinded 1st thru 3rd. What will I need to look for? I have the mainshaft and countershaft out and I know the brass pieces are the synchros and they shouldn't be rounded. Well I guess my question would be what...
  3. Transmission alley
    Disclaimer: The following is provided as a GUIDE ONLY, and neither myself nor take any responsibility for the outcomes of someone else doing the following. You follow these steps at your own risk! OK, so this kills two birds with one stone. THe first part of taking the tranny...
1-3 of 3 Results