Honda D Series Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-4 of 4 Results
  1. Naturally Aspirated
    my current set up is z6 head and block p29 pistons oem rods stage 2 crower NA cam (63442z) with BC springs and retainers RC 440cc injectors DC 4-2-1 header, test pipe and 2.25" catback exahust skunk 2 pro series IM, 66mm skunk2 TB and blox 4" intake Blaster coil, Pro cap and 6AL box...
  2. New Member Introductions
    I'm running 11:1 compression y8 mini me with pm6 pistons, the head has been shaved a bit. Well... I know that it is not running as good as it should due to stock y8 ecu, to keep it from killing its self i put a spark plug non-fouler on the upstream o2 sensor and it helped considerably. I am...
  3. Engine Management
    A little background about my car. I have a 2000 ek sedan with a stock D16Y8. The motor was rebuilt with new bearings, rings and gaskets. im planning on going turbo but i cant figure this knock out. It doesnt knock at idle and when you rev it up there is a sweet spot id say like 3-5k rpm it...
  4. Engine Building
    got a stock d16z6. my ignition timing is slighly off (retarded), but I've maxed out distributor rotation completely. What am I screwing up? Where could the problem be?
1-4 of 4 Results
Top