Honda D Series Forum banner

high idle

  1. Need Help Bad!!!

    Engine Building
    Installed the edelbrock performer x on my d16y8 98 civic ex and the godspeed 68mm throttle body. Now, the stock throttle body has a water jacket that the iacv hooks to, the godspeed does not. So my only thought was to cap off the tubing going from the iacv to the throttle body. Hooked everything...
  2. D16Z6 High idle 1k - 1.5k (increases with temp)

    General Tech
    I have a D16Z6 in a 93 del sol with a p28 ecu, Before i got my connectors sorted out there were like 3 different 2 pin connectors on the back of the IM weren't in the right component. I got the IACV connected and now the idle is too high. When i start it up cold its around 1000rpm and it goes to...
  3. Really High Idle after Head Gasket replaced

    Engine Management
    I changed my head gasket on my stock 1991 D16a6, there are no after market parts or chips done to my car. Before I changed out my head gasket the car idled and ran just fine with the exception of a blown head gasket. After completely replacing the head gasket and putting the whole engine back...
Top