help me!

:ninja:3rd gen Dohc ZC. Obd1 with Chipped p28 ecu with respective basemap. I already checked for signal at the ecu. I've used an ohm meter and test light on power source to dizzy. Changed cap and rotor. While it was off, I checked for power at the shaft, and nothing. I took ohm tester to every...

Dohc ZC 3rd gen blacktop. p28 ecu with the right basemap. converted to obd1 with respective part changes.(all New) Has spark guaranteed. (Brand spanking new Dizzy) Fixed mechanical timing. Was off a tooth on the intake side. Car will crank and turn over No weird sounds coming from valves. I'm...

hi im new here and i wanted some help on my issues which is whenever i go full throttle the car sort of sputters or it seems like the exhaust gets cut off or the power gets cut off. it happens at about 6 to 6.5 rpms but not when its not under load. i am completely lost at what the problem could...

So i bought a D15B7 motor with a 5spd manual transmission but... The motor didnt come with a starter :(. Ive serched online for starters nd came up with 2 types... Nippondenso nd mitsuba. What one do i buy? The motor came out of a 95 civic dx. My old motor was an automatic nd the mounting holes...

I have a set of 2" Tokico lowering springs from my buddy. I have heard that you do need new shocks/struts, and I have also heard that you don't. I'm assuming I should probably get new shocks/struts before attempting to lower my 1995 Honda Civic EX Coupe since the springs are 2". If that is...

So I'm about to pull the trigger on my 3rd Civic, but the only one I feel somewhat comfortable getting in the area (SW Germany) has a really lame aftermarket moonroof installed. I was just wondering if any of you guys have had any experience or could point me in the right direction with...