Honda D Series Forum banner

fuel

  1. Injectors Problem!!!!!!!!

    New Member Introductions
    D16Y8-No Power To Injectors I was replacing my injectors for a bigger size (450cc) aftermarket, they where suppose to be direct fit but you know ebay stuff, any way after fitting and wiring I got it to start and run , BUT i left the wires expose and when I try to move them out of the way (the...
  2. Do I need a Fuel Pressure Regulator (FPR) and/or Fuel pump??

    New Member Introductions
    I've been searching here and around for an answer but can't find anything, just hints and tips. Here's my situation: I got this turbo kit => fastwayracer.com/Forced-Induction-Turbo-Kits/c1_3/p2931/88-00-Honda-Civic-D15/D16-T3/T4-Ram-Horn-Turbo-Kit/product_info.html and it says I only need to...
  3. Dohc ZC No Start

    DOHC ZC
    Dohc ZC 3rd gen blacktop. p28 ecu with the right basemap. converted to obd1 with respective part changes.(all New) Has spark guaranteed. (Brand spanking new Dizzy) Fixed mechanical timing. Was off a tooth on the intake side. Car will crank and turn over No weird sounds coming from valves. I'm...
  4. Fuel Pump Question

    New Member Introductions
    So I'm building a d15b7 with a garrett tb03 turbo from a volvo, I am ordering a set of 450cc injectors, and a aem fuel pressure regulator and ill need some resistors I believe, I'll also be running Hondata and Im just wondering if it is necessary to upgrade my fuel pump as well? I'm only going...
  5. D16 Precision 6262 ignition\fuel problem on boost

    Forced Induction
    Hi, I have a pretty phantom problem appearing with my turbo'd D16. Let's start from the setup: - Fully build D16 block (eagle rods, wiseco pistons, block guard, headstuds, etc.) - stock Z6 head (not from D16Z6, but from european D15Z6 VTEC-E). This has the same casting as D16Y8 head, but...
  6. D16y8 throttle hesitation/misfire low rpm

    General Tech
    Hey guys quick question. I've been noticing something odd for a couple months now. When my pull out normal between 1100-2600 range rougly my car will bog in a way then in a flash just gain its normal torque i assume while steady 1/4 throttle. After 3 grand it seems to run fine. It wont do it...
  7. Fuel Emmisions and Starting Issues

    Engine Building
    Lately the car has been putting out a lot of fuel fumes while idle. My cabin air intake seems to suck it right out of the bay and pump it into my face. My nose leads me to either the fuel filter (which looks perfectly fine) or the EVAP canister (which has everything attached except the vacuum)...
  8. D16y8 cuts in and out

    Engine Management
    Hello I drive a 95 civic ex with a stock d16y8 engine and the p28 ecu is chipped. My engine cuts in and out if i press the gas pedal to the floor when I'm at 4500 rpm. I'm not sure if this is a fuel or tuning issue. Only mods the car has is a 3 inch exhaust from the header back, aftermarket...
  9. d- series frankenstein

    Engine Building
    okay, i need help, i need to know if there is anyway of knowing if rdx injectors will fit in my STOCK fuel rail and brackets in my d-17A1 or if there is any modifications i need to do, i am running aem f/ic and a custom turbo setup and need to get the fuel system setup to finalize the project, i...
  10. no fuel d16z6

    Naturally Aspirated
    i have a d16z6 swap wtih a y8 head and a6 pistons. after i fixed all the problems for the car not wanting to start it it fianlly did. Come to find out im only running on cylinders 1 and 3. 2 and 4 have spark but are not getting fuel. I tried difference injectors that work but still nothing. so...
  11. Ticking noise

    Naturally Aspirated
    Hi, have noticed a ticking noise, it stays constant at all rev's, only really noticed today; fuel tank is low, wondered if it could be pump ; Is pump in tank or external , if so, where is it located please. Any suggestions would be great. Mark
  12. Fuel line help!

    General Tech
    Whats up people! I need some help, i blew a brake line 2day and went to fix it and realized that the other one was shot as well so i replaced both. but when i was doing them i realized that all the fuel lines next to brake lines are really rusted and one was pissing a lil gas out (explaines the...
  13. d16z6 wont start. Please help

    General Tech
    I have a 94 civic ex USDM with stock d16z6 motor. I had problems getting the ecu to read 10 lbs of boost but now its good. When I test drove the car it ran fine. Turbo spooled up and everything just perfect. But it then backfired and would not start again. When it cut off i looked at the fuel...
  14. Help. D16z6 Wont Start

    Forced Induction
    I have a 94 civic ex USDM with stock d16z6 motor. I had problems getting the ecu to read 10 lbs of boost but now its good. When I test drove the car it ran fine. Turbo spooled up and everything just perfect. But it then backfired and would not start again. When it cut off i looked at the fuel...
  15. D15B VTEC leaking gas

    General Tech
    what is this thing? pictured above.... i dont know the vacuum diagram for a d15b vtec with multi poing injection . i wired it up and had my buddy turn the key it runs for about 2 seconds and then dies but this thing pictured above sprays gas i cant try to figure out the vacuum lines untell i...
  16. AEM Fuel Filter Civic Installation

    General Tech
    Hey my AEM fuel filter just showed up today, I plan on installing it this weekend in my 96 civic ex (d16y8 ). It doesnt look like it will be to difficult but I have a concern. Some people recommend just unscrewing the fuel cap to relieve pressure. I have also heard that you should remove the...
  17. Walbro pump?

    Forced Induction
    This summer i will be rebuilding my d16y8 for turbo. i have already made a solid list of parts, most of which i have done research on or can probably find info. i expect everything i buy to be quality (do it right the first time). I would like to focus this thread on the fuel pump. I have...
  18. Need quick help with the 'Charcoal Cannister' REALLY UNSURE

    Naturally Aspirated
    Hey guys the problem goes like this, Been building a Rally car for a while now, EG Shell with N/A D16Z6 (standard engine) , ive pulled all the brake and fuel lines out to relay them inside the car for obvious reasons. I know what to do with it all part from the fuel line/breather that attatches...
Top