Honda D Series Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-10 of 10 Results
  1. Engine Building
    So, I'm looking to get a bit more power out of my D14 and I'm having a hard time finding any kind of a D16 intake manifold. D15Z6 intake manifolds are readily available for me at a very cheap price so my questions go: What is the possible power gain of such a swap? Is it even possible? I'm...
  2. General Tech
    Hi guys, I had a couple of oil leaks (main seal and oil pan) and a worn-out clutch. And I needed to change my belts so I removed the engine from the car, put it in the engine stand replaced the oil pump seal and rear main seal, replaced oil pan and valve cover gasket. Did the timing, replaced...
  3. General Tech
    So I yesterday I changed my PCV valve on my Civic EK3 (D15Z6) because my engine was consuming a lot of oil and I also noticed some smoke and I thought it would be the PCV valve that was blocked and the air was comming out by the Crankcase Breather Hose with some oil. After changing the PCV...
  4. New Member Introductions
    Hi everyone, my name is Chris, i'm from Germany and learning to become a mechanic for cars here. I'm apologizing for any kind of gramatical errors. I'm owning a '92 Civic EG4 (EDM) with the 90 bhp D15B2-Mono-Jetronic. Due to an engine-breakdown I have the problem that I need to swap the...
  5. Engine Building
    Hey Guys, I've got a quick question. Can i accomplish a mini-e with stock 190cc injectors and stock distributor? The rocker arms and camshaft are from a d16z6. Thanks in advance! (d15z8 is almost the same as d15z6)
  6. Engine Building
    Hey guys, Im new here so thaught I would start with my situation, couple of weeks ago I baught a d15z6 ek3 which ran good, sounded good and pulled very well! after 5 days the immob light kicked on and after paying someone £100 pound to try and fix it still no luck...had it de-immobilised and all...
  7. Engine Building
    Hey guys, Im new to hondas, so forgive me if this has been covered a million times. I would like to put a z6 head on my y7 engine. I've seen a number of write ups to go from a y7 to y8, but have not had much luck from a y7 to a z6. . . ive got a 97 dx (d16y7) I've found a z6 head, intake, and...
  8. Engine Building
    Hi, i have a d15z6 (yes it's a d15z6, i'm in the UK) I was reading somewhere that someone put a y8 cam into my head and that tuning it to get it working ended up in excellent results. Now to my question... I'm looking into getting a d15b 3 stage vtec, and was wondering if it'd be possible to...
  9. General Tech
    Hi , first post on this forum so be gentle i have a d15z6 ( yes it's a d15z6, i'm in the UK) I was reading somewhere that someone put a y8 cam into my head and that tuning it to get it working ended up in excellent results. Now to my question... I'm looking into getting a d15b 3 stage vtec...
  10. Naturally Aspirated
    My d15z6 ek3 now is "eating" oil so im planning to change piston rings, valve seals and maybe i should try to find d16z6 head, put it on - is it a "bolt-on" and what gains? Stock i/e mani, thinking about buying exhaust header 4-2-1 from ebay, but some sellers there say, that they wont fit...
1-10 of 10 Results
Top